EFLA1010 E-Flite 10-Amp Pro Brushless ESC

Home > Speed Controllers & BEC > E-Flite ESC >

10-Amp Pro Brushless ESC

Our Price: $29.99

Product Code: EFLA1010

Qty:

Description

10-Amp Pro Brushless ESC with Advance Programming and BEC

Features

10-Amp Pro Brushless ESC

Key Features

Up to 10 amps continuous current with proper air flow
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cut-off with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or Auto Select)
Auto motor shut down if signal is lost or there is interference
Programmable timing—2 user selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Soft start

Overview

This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2-3 cell Li-Po battery packs and up to four submicro servos. Standard features include advance BEC and safe power arming along with programmable features such as low voltage cutoff, braking, timing, and throttle input range.

Specs

Brake: Yes - Programmable

Continuous Maximum Current: 10 Amps

Input Connector Types: 20 AWG with JST Connector

Output Connector Types: 20 AWG with 2mm Female Gold Bullet Connectors

Momentary Peak Current: 12A (15 sec)

Dimensions (WxLxH): 17.5x30x10 mm (.7x1.2x.4 in)

Weight: 10g (.35 oz)

Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd

10-Amp Pro Brushless ESC Manual (123 KB)

Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item:

Speed Controllers & BEC > E-Flite ESC