Features
Key Features
- 100% factory assembled and test flown
- Ultra-micro size and weight perfect for indoor flying
- Includes everything needed to fly except the transmitter
- Compatible with all transmitters and modules equipped with Spektrum™ DSM2™ technology
- Coaxial, counter-rotating rotor head design for unsurpassed stability and ease of flight
- Factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos
- 1S 3.7V 110mAh LiPo battery and 1S 3.7V DC LiPo charger
- The Blade® mCX offers a level of precise control that's unmatched by any other dual-coaxial helicopter on the market today
Overview
The Blade® mCX is an ultra micro-sized version of the Blade CX/CX2 that offers first-time and experienced helicopter pilots unsurpassed stability and incredible control through the coaxial, counter-rotating head design and Spektrum™ 2.4GHz DSM2™ control. Its single-cell LiPo battery charges in approximately 30 minutes and delivers flight times of 6–8 minutes, while full, 4-channel control provides the precision needed for flying in those tight spaces indoors. All you need to do is bind your DSM2 transmitter or module to the Blade mCX's receiver and your adventure into the new era of RC flight begins. With its cutting-edge engineering, design, technology and performance, the Blade mCX Bind-N-Fly™ is sure to provide you with hours of helicopter flying fun.
The unique 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos will bind to your DSM2 transmitter to give you the most advanced mCX fight experience. You can take full advantage of utilizing dual rates, mixing and other capabilties of your transmitter. You can experience heading-lock-like performance and fully proportional control all in this one-ounce package, just bind and fly.
Compatible with the following DSM2 transmitters:
• E-flite® LP5DSM (included with Blade CX2)
• ParkZone® Vapor™ transmitter
• JR® 12X
• JR X9303
• Spektrum DX5e
• Spektrum DX6i
• Spektrum DX7
• Spektrum Modules
Specs
- Type:Ultra micro coaxial helicopter
- Main Rotor Diameter:7.5 in (190mm)
- Gross Weight:With battery 1.0 oz (28 g)
- Length:7.9 in (200mm); Height: 4.7 in (120mm)
- Motor Size:Micro coreless (2 installed)
- Kit/ARF/RTF:BNF
- Experience Level:No Experience Necessary
- Recommended Environment:Indoor
- Is Assembly Required:No
Purchase the Bind-N-Fly version, and use your favorite DSM2 transmitter.
The Blade mCX’s coaxial, counter-rotating blades cancel out the rotational torque that makes hovering a conventional heli difficult. They provide extra stability in all other phases of flight, too, making this a heli just about any first-time pilot can fly with complete confidence and success.
Compatible with all transmitters using DSM2 technology. Use your favorite DSM2 transmitter.
The Blade mCX’s coaxial, counter-rotating blades cancel out the rotational torque that makes hovering a conventional heli so difficult. Instead of a tail rotor, the Blade mCX uses differential rotor speed for tail control so the inherent stability of the counter-rotating blades is preserved in all phases of flight, making this a heli any first-time pilot can enjoy.
The 5-in-1 Control Unit is a lightweight combination of main motor electronic speed controls, mixer, servos and a Spektrum DSM2 compatible receiver.
The Blade mCX's custom configured, 1S 3.7V 110mAh Li-Po battery (EFLB1101S) offers flight times of 6-8 minutes per charge. Having spare LiPo batteries on hand will help keep your downtime between charges to a minimum.
These optional parts, including main rotor blades (EFLH2220GL and EFLH2221GL), swashplate (EFLH2216GL), main frame set (EFLH2224GL), landing skid set (EFLH2222GL) and tail fin (EFLH2228GL) have the same design as the stock parts, but are molded in a special glow-in-the-dark material that makes it possible to fly the Blade mCX in the dark.
|
