**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and
            airfoiled control surfaces, motor box preinstalled with blind nuts
            providing perfect spacing for spinner backplate-no need for
            measuring, cowl ring also preinstalled
          Wings: Two piece with carbon fiber wing joiner, secures to fuselage
            with wing hooks and rubber bands inside fuselage
          Motor Mount: Built-up plywood
          Covering:
          Aileron Control: Dual servo
          Cowl: Prepainted fiberglass, attaches with rare earth magnets
          Canopy: Clear, single
          Wheel Pants: Prepainted ABS
          Landing Gear: Prepainted aluminum 0.079" (2mm) thick
          Wheels: Two foam 1.75" (44mm) diameter
          Spinner:        plastic, --" (--mm) diameter
          Hardware: Full set included
          Building Time: Approximately 4-6 hours
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            date of purchase.

INCLUDES: ElectriFly ARF SU-31 3D Aerobatic Airplane with fiberglass cowl,
            ABS wheel pants, landing gear, wheels, hardware, photo-illustrated
            instruction manual and two decal sheets

REQUIRES: Radio: 4 channel
          Servos: 4-micro
          Dual Servo Extension: For aileron servos
          6" (150mm) Slim Extension Wire: Two
          12" (305mm) Servo Extension: Two
          Motor: Rimfire 35-30-1250 outrunner
          35A ESC for Brushless Motors:
          Battery: LiPo 1250 - 1500mAh 11.1V
          Cell Balancer: For LiPo battery,
          Battery Charger: LiPo compatible
          Propeller: 10x7E

SPECS:    Wingspan: 41" (1040mm)
          Wing Area: 343 sq in (22.1 sq dm)
          Weight: 27.5 - 31 oz (780 - 880g)
          Airfoil: Fully symmetrical, mid wing placement
          Wing Loading: 11.5 - 13 oz/sq ft (35 - 40 g/sq dm)
          Length: 38" (965mm)
          Center of Gravity: 2-5/8" (67mm) back from the leading edge of the
            wing at the fuselage side

          Control Throws-  Low Rate          High Rate           3D
            Elevator:  3/8" (9.5mm) 7° 1/2" (12.7mm) 10°    2-1/4" (57mm) 48°
            Rudder:  1-1/4" (32mm)  16° 2" (51mm)    26°    3-1/4" (83mm) 45°
            Ailerons: 1/2" (12.7mm) 11° 3/4" (19.1mm) 14°   1-5/8" (41mm)