|
|
|
APC propellers are molded of composite materials using long chopped nylon fibers, carbon fibers and hand-laid fibers.
The Thin Electric propellers are not for Glow engine use and RPM limits of 190,000/diameter in inches must be observed.
The "E" line or thin electric props are a higher aspect ratio and have less blade area then the Slofly line and therefore require less power then the same size Sloflyer. Recommended to reduce the load on both motor and battery with little loss of performance.
|
|
|
|
|
APC propellers are molded of composite materials using long chopped nylon fibers, carbon fibers and hand-laid fibers.
The Slofly propellers are not for Glow engine use and RPM limits of 65,000/diameter in inches must be observed.
The Slowfly props are a lower aspect ratio and have more blade area then the Thin Electric line and therefore require more power then the same size "E"prop. Recommended for lower power applications. For example, using the RPM limit criteria you should not be turning a 10 inch prop over 6,500 rpm.
|
|
